SE-Series

Home Integrated Servomotors SE-Series

SE-SERIES

The SE-series is an upgraded version of the previous SC-series. The SE-series is a compact, brushless DC-motor with integrated driver and control, including positioning feedback (encoder). The motor has an outrunner rotor with permanent magnets which makes it very powerful relative its size and weight. The encoder technology is patented and has no rotating parts. The resolution is equal to conventianal high resolution encoders.

The 3 different models are compatible with NEMA standard and are specified for 12-48VDC. The integrated control performs closed loop control of speed and position, and supports ramping with controlled acceleration. Protection features guard the device from over current, voltage, temperature and torque.

To facilitate standalone operation, the built-in control unit has analog and digital inputs and digital outputs, as well as encoder input and step motor emulation inputs. There are configurable features for simple control interfaces using buttons and potentiometers for standalone applications.

SE010

  • Continuous output of 25W and 60 mNm torque at 4000rpm
  • Brushless outer rotor DC-motor with peak torque of 200 mNm
  • Specified for 12-48VDC
  • Integrated drive electronics with 4096 (16384 available) positions/revolution position sensor
  • PID regulator for position or speed control with torque limit
  • Ramp control of speed or position
  • Protection features for current, torque, voltage and temperature
  • Serial interface RS485 with Modbus RTU protocol
  • CAN
  • Quadrature encoder input for application use
  • Interface signals for step motor emulation (step/direction)
  • Up to 8 digital inputs and 4 analog inputs
  • 4 digital outputs capable of 30V/1A, with pulse, PWM and RC Servo control modes.
  • PC based software for setup and testing

SE020

  • Continuous output of 50W and 120 mNm torque at 4000rpm
  • Brushless outer rotor DC-motor with peak torque of 500 mNm
  • Specified for 12-48VDC
  • Integrated drive electronics with 4096 (16384 available) positions/revolution position sensor
  • PID regulator for position or speed control with torque limit
  • Ramp control of speed or position
  • Protection features for current, torque, voltage and temperature
  • Serial interface RS485 with Modbus RTU protocol
  • CAN
  • Quadrature encoder input for application use
  • Interface signals for step motor emulation (step/direction)
  • Up to 8 digital inputs and 4 analog inputs
  • 4 digital outputs capable of 30V/1A, with pulse, PWM and RC Servo control modes.
  • PC based software for setup and testing

SE040

  • Continuous output of 120W and 280 mNm torque at 4000rpm
  • Brushless outer rotor DC-motor with peak torque of 800 mNm
  • Specified for 12-48VDC
  • Integrated drive electronics with 4096 (16384 available) positions/revolution position sensor
  • PID regulator for position or speed control with torque limit
  • Ramp control of speed or position
  • Protection features for current, torque, voltage and temperature
  • Serial interface RS485 with Modbus RTU protocol
  • CAN
  • Quadrature encoder input for application use
  • Interface signals for step motor emulation (step/direction)
  • Up to 8 digital inputs and 4 analog inputs
  • 4 digital outputs capable of 30V/1A, with pulse, PWM and RC Servo control modes.
  • PC based software for setup and testing

ACCESSORIES

SOFTWARE

This website uses cookies. By continuing to use this site, you accept our use of cookies.