SC010
Specifications
- Continuous output of 25W and 60 mNm torque at 4000rpm
- Brushless outer rotor motor with peak torque of 200 mNm
- Integrated drive electronics with 4096 positions/revolution position sensor
- PID regulator for position or speed control with torque limit
- Ramp control of speed or position
- Protection features for current, torque, voltage and temperature
- Serial interface RS485 with Modbus RTU protocol
- Quadrature encoder input for application use
- Interface signals for step motor emulation (step/direction)
- Up to 8 digital inputs and 4 analog inputs
- 4 digital outputs capable of 30V/1A, with pulse, PWM and RC Servo control modes.
- PC based software for setup and testing
Documentation
CAD
Firmware
SC020
Specifications
- Continuous output of 50W and 120 mNm torque at 4000rpm
- Brushless outer rotor motor with peak torque of 400 mNm
- Integrated drive electronics with 4096 positions/revolution position sensor
- PID regulator for position or speed control with torque limit
- Ramp control of speed or position
- Protection features for current, torque, voltage and temperature
- Serial interface RS485 with Modbus RTU protocol
- Quadrature encoder input for application use
- Interface signals for step motor emulation (step/direction)
- Up to 8 digital inputs and 4 analog inputs
- 4 digital outputs capable of 30V/1A, with pulse, PWM and RC Servo control modes.
- PC based software for setup and testing
Documentation
CAD
Firmware
SC040
Specifications
- Continuous output of 120W and 280 mNm torque at 4000rpm
- Brushless outer rotor motor with peak torque of 800 mNm
- Integrated drive electronics with 4096 positions/revolution position sensor
- PID regulator for position or speed control with torque limit
- Ramp control of speed or position
- Protection features for current, torque, voltage and temperature
- Serial interface RS485 with Modbus RTU protocol
- CANOpen 301 interface
- Quadrature encoder input for application use
- Interface signals for step motor emulation (step/direction)
- Up to 8 digital inputs and 4 analog inputs
- 4 digital outputs capable of 30V/1A, with pulse, PWM and RC Servo control modes.
- PC based software for setup and testing
Documentation
CAD
Firmware